Gearsint EPN
ISO 150
Product code: 0174.61
Fully Synthetic lubricant based on Poly-Alpha-Olefins (PAO) for reduction units, gears, bearings and worm gear reducers even subject to high loads and working temperatures.
It provides excellent micropitting resistance.

PAKELO GEARSINT EPN ISO 150 is a lubricant specifically developed for lubrication of gears and reduction units even of the latest generation.

The product is formulated with Poly-Alpha-Olefins and other selected synthetic base stocks and with special anti-corrosion, anti-oxidative, antifoam, anti-rust and pour point depressant additives.
Its high Viscosity Index guarantees more stable lubrication over a wide range of operating temperatures.

Even comparing transmitted power, the most recent reduction units show smaller size and are subject to heavier loads and thus more severe working temperatures.
In comparison with traditional mineral base products, the product is suitable for use for longer periods even in severe conditions thanks to its excellent antioxidant and thermal properties.

Furthermore PAKELO GEARSINT EPN ISO 150 provides excellent anti-wear and EP properties and does not corrode copper and/or copper alloys.
The product eases separation from water thanks to its high demulsifying characteristics, enabling an easy draining of water in case of significant amount of water contamination.

Its special performance package has been developed to confer to the product high resistance to conventional wear, such as scoring, scuffing, pitting, even in the presence of heavy and shocking loads and exceptional resistance to micropitting phenomenon, especially in gears susceptible to surface treatments that harden contact surfaces.

This phenomenon of micro-wear on surfaces, that can occur even on lightly loaded gear teeth, produces vibration and noises and can bring to a premature development of conventional pitting and scoring phenomena reducing life of the lubricated part.

PAKELO GEARSINT EPN ISO 150 thus helps to prevent wear of gears and bearings used in reduction units in many working conditions; it helps as well to limit to minimum power losses and overheating due to friction while decreasing power adsorbing and increasing mechanical part efficiency.

Fields of application

PAKELO GEARSINT EPN ISO 150 is a lubricant suitable for lubrication of gears and industrial reduction units working both with circulation and splash lubrication systems, even operating at high speeds and heavy or shocking loads. Thanks to its particular chemical and physical characteristics, it is particularly recommended where gears are exposed to high thermal excursions, start-ups at low temperatures and high working temperatures.

The additive package used allows, in mineral base stocks, to exceed the severe requirements of Flender (Revision 14) specification for industrial gears. This is also the reason why the product is particularly recommended for all kinds of reduction units and applications subject to micropitting phenomenon.

PAKELO GEARSINT EPN ISO 150 is suitable for the use in gears and bearings of wind turbines, reduction units of extruders for plastics, reduction units in use in paper mills, steel mills, cement plants, textile, steel and wood industry, etc.
It can be used also in marine gearing, plain and rolling element bearings, especially in slow speed and high load applications, and in many further industrial gearing such as conveyers, agitators, dryers, fans, etc.

PAKELO GEARSINT EPN is available in a wide range of ISO viscosity grades. For the correct Viscosity Grade please refer to Constructor recommendation and ambient temperatures.

Levels of performance

DIN 51517 Part 3 CLP HC, US Steel 224, AGMA 9005-E02, ISO 12925-1 CKC/CKD,
David Brown S1.53.101, GM LS 2 EP Gear Oil, Fives Cincinnati Machine Gear.