Coolant G05® Yellow
Product code: 1104.00
Engine coolant concentrate based on ethylene glycol that needs to be diluted with water before use. It contains a corrosion inhibitor package with nitrites, borates and silicates. It is free of amines and phosphates. It effectively protects engine cooling systems against overheating, frost, corrosion and deposits. Due to its nitrites content this product is especially recommended for use in heavy-duty engines.

PAKELO COOLANT G05® YELLOW is an innovative anti-freeze/coolant, easily biodegradable, that contains a corrosion inhibitor package with nitrites, borates and silicates.
It is free of amines and phosphates.

Mono Ethylene Glycol based coolant, PAKELO COOLANT G05® YELLOW effectively protects engine cooling systems against overheating, frost, corrosion and deposits.

Through its special inhibitors the product protects all metallic engine components against corrosion for a period superior to that of conventional coolants.

PAKELO COOLANT G05® YELLOW provides several properties both to Constructors and to the end consumer.
The use of this special product guarantees:

–  better heat transfer properties;

–  better compatibility with new generation aluminium heat exchangers;

–  reduced maintenance especially during the warranty period (thermostat, radiator, water pump, etc.);

–  superior anti-corrosion protection for long periods;

–  application in mixed fleets (cars, vans, heavy duty systems, excavators, etc.);

–  more environmentally friendly thanks to the easy biodegradability of the product;

–  greater reliability due to the highly stabilized inhibitor agents;

–  difficult incidental ingestion due to the bitter taste of the product.

Water dilution

PAKELO COOLANT G05® YELLOW is a concentrate product to be diluted in water before use.
It can be mixed with water at any percentage and it provides good stability also if mixed with hard waters.

The product should be mixed with demineralized, deionized water or soft water.
It is also allowed the use of not hard tap water (water hardness less than 3,6 mmol/l).
Do not use sea water, waste water, industrial waste water, etc.. and water with chloride and sulphate content more than 100 ppm each.

The optimal blend of coolant and water is at a 50/50 volume ratio.
In this way freeze protection provided is up to -38°C.
To guarantee a good protection against corrosion and at the same time a freeze protection we recommend the use of coolant in water between 33% and 60% in volume.

Please follow the chart below to evaluate freezing protection versus water dilution:

Freeze Protection Antifreeze content % in volume (out of 100 parts of the blend)
-18°C 33%
-26°C 40%
-32°C 45%
-38°C 50%
-46°C 55%
-55°C 60%

It is important to prepare coolant/water mix outside of cooling circuit and before filling it.

Miscibility with other antifreeze products

In order to obtain the best performance and longer drain intervals, we recommend to use only PAKELO COOLANT G05® YELLOW.
Mixing with other coolants is not recommended.

Fields of application

PAKELO COOLANT G05® YELLOW is a protection fluid for cooling and heat exchange systems of recent and previous generation engines.
The product is particularly recommended for new generation cooling systems using last generation metal alloys and gaskets and working with high temperatures.

PAKELO COOLANT G05® YELLOW provides longer working life and, due to its nitrites content, it is especially recommended for use in heavy-duty engines.
Please follow performance levels and approval recommendations to know the suitable application for the product.
For maximum drain intervals (kilometers or operating times, whichever comes first) please follow OEM’s Recommendations.

Approvals

Cummins CES 14603, Ford North America WSS-M97B51-A1, JCB STD00088, John Deere JDM H 24,
MAN B&W Liste 3.3.7, MB Spec. 325.0, MTU MTL 5048.

Levels of performance

AS 2108-2004, ASTM D3306/D6210, BS 6580:2010, CUNA NC 956-16, AFNOR NF R 15-601,
Önorm V 5123, SAE J1034, SANS 1251:2005, SH 0521-1999.