Coolant GG40® Hybrid
Product code: 1105.00
Engine coolant concentrate based on ethylene glycol and glycerin that needs to be diluted with water before use. It contains a corrosion inhibitor package based on organic acid salts and silicates (Si-OAT coolant). It is free of nitrites, amines, phosphates and borates. It effectively protects engine cooling systems against overheating, frost, corrosion and deposits.

PAKELO COOLANT GG40® HYBRID is an innovative anti-freeze/coolant, easily biodegradable, that contains a corrosion inhibitor package based on organic acid salts and silicates (Si-OAT coolant).
It is free of nitrites, amines, phosphates and borates.

Mono Ethylene Glycol and glycerin based coolant, PAKELO COOLANT GG40® HYBRID effectively protects engine cooling systems against overheating, frost, corrosion and deposits.

Through its special inhibitors the product protects all metallic engine components against corrosion for a period superior to that of conventional coolants.

The use of this special product guarantees:

–  better heat transfer properties;

–  better compatibility with new generation aluminium heat exchangers;

–  reduced maintenance especially during the warranty period (thermostat, radiator, water pump, etc.);

–  superior anti-corrosion protection for long periods;

–  application in mixed fleets (cars, vans, heavy duty systems, excavators, etc.);

–  more environmentally friendly thanks to the easy biodegradability of the product;

–  greater reliability due to the highly stabilized inhibitor agents;

–  difficult incidental ingestion due to the bitter taste of the product.

Water dilution

PAKELO COOLANT GG40® HYBRID is a concentrate product to be diluted in water before use.
It can be mixed with water at any percentage and it provides good stability also if mixed with hard waters.

The product should be mixed with demineralized, deionized water or soft water.
It is also allowed the use of not hard tap water (water hardness less than 3,6 mmol/l).
Do not use sea water, waste water, industrial waste water, etc.. and water with chloride and sulphate content more than 100 ppm each.

The optimal blend of coolant and water is at a 50/50 volume ratio.
In this way freeze protection provided is up to -35°C.
To guarantee a good protection against corrosion and at the same time a freeze protection we recommend the use of coolant in water between 33% and 60% in volume.

Please follow the chart below to evaluate freezing protection versus water dilution:

Freeze Protection Antifreeze content % in volume (out of 100 parts of the blend)
-16°C 33%
-22°C 40%
-28°C 45%
-35°C 50%
-43°C 55%
-51°C 60%

It is important to prepare coolant/water mix outside of cooling circuit and before filling it.

Miscibility with other antifreeze products

In order to obtain the best performance and longer drain intervals, we recommend to use only PAKELO COOLANT GG40® HYBRID.
Mixing with other coolants is not recommended.

Fields of application

PAKELO COOLANT GG40® HYBRID is a protection fluid for cooling and heat exchange systems of recent and previous generation engines.
The product is particularly recommended for new generation cooling systems using last generation metal alloys and gaskets and working with high temperatures.

PAKELO COOLANT GG40® HYBRID provides longer working life and it has been developed for cooling systems of recent Volkswagen group cars.

For maximum drain intervals (kilometers or operating times, whichever comes first) please follow OEM’s Recommendations.

Approvals

VW/Audi/Seat/Skoda/Lamborghini TL 774-J.

Levels of performance

ASTM D3306, CUNA NC 956-16, BS 6580:2010.