Multisint Ultra
SAE 10W/40
Product code: 4001.17
Synthetic based lubricant for gasoline and Diesel engines, also turbocharged, of the latest generation.

PAKELO MULTISINT ULTRA SAE 10W/40 is a new generation lubricant formulated with high quality base stocks and exclusive additives that confer to the product high detergent, dispersant, anti-oxidative, anti-corrosion, anti-wear and antifoam properties.

PAKELO MULTISINT ULTRA SAE 10W/40, thanks to the use of a selected synthetic base stock, provides better characteristics when compared to a straight mineral lubricant.

Volatility, oxidation and the formation of carbon residues are reduced: this enables PAKELO MULTISINT ULTRA SAE 10W/40 to improve anti-oxidative properties and to avoid formation of deposits also with presence of high working temperatures.

The SAE Viscosity Grade 10W/40 guarantees the correct viscosity also in case of severe climatic conditions: this means easy and safe start-ups at very low temperatures (also at -25°C) and reduction of the hazard of wear to minimum during warming up phases.

The product improves protection of all modern engines guaranteeing longer life of post-treatment devices used in modern cars or vans.

PAKELO MULTISINT ULTRA SAE 10W/40 exceeds some of the main performance levels on the market (Mercedes Benz, Volkswagen, etc.).
It is possible to extend oil drain intervals, according to Constructors’ recommendations.

Oil drain intervals are usually specified by OEMs and/or on-board electronic devices of latest generation vehicles; their recommendations should be taken into consideration to guarantee engine reliability.

PAKELO MULTISINT ULTRA SAE 10W/40 is perfectly compatible with all the lubricants that have the same application. However, we recommend to avoid mixing it with other products for not undermining its properties.

Fields of application

PAKELO MULTISINT ULTRA SAE 10W/40 has been developed for gasoline and Diesel engines, aspirated or supercharged (turbo), working also under heavy duty conditions as for instance “stop and go” service.

The product also satisfies the Specification ACEA A3/B4 and is thus particularly recommended for latest generation turbodiesel engines using “common rail” or “injection-pump” systems.

The use of special additives and a selected synthetic base stock enable the use also in earlier generation of car engines and vans.

Levels of performance

ACEA A3/B4, API SL / CF, MB 229.1, VW 501.01, VW 505.00.